Seek Amp

Backzip Semidry 4/3 ITEM NO. 48212-4407
Seek Amp Semidry 4/3 BZ DL
Seek Amp Semidry 4/3 BZ DL
Seek Amp Semidry 4/3 BZ DL
Seek Amp Semidry 4/3 BZ DL
Seek Amp Semidry 4/3 BZ DL
ITEM NO. 48212-4407

Colourways

Seek Amp Semidry 4/3 BZ DL black
Seek Amp Semidry 4/3 BZ DL black/black capsule
Seek Amp Semidry 4/3 BZ DL Inside View
FIND YOUR Dealer >

Line Concept

SIZEFINDER

Temperature

KEY FEATURES

SPECS

MATERIALS

SIZES

 
Toasty Warm Toasty Warm
Epic Stretch Epic Stretch
Seam Sealing Seam Sealing
Minimal Panel Design Minimal Panel Design

Dry_Grid

Leave the water in its rightful place down below, not in your wetsuit – Drygrid absorbs up to 30% less water. As a result, the wetsuit is lighter and cooling by evaporation is reduced. Last but not least the look of the Drygrid contributes to the sophisticated detailing.

Plasma_Plush 2.0

Premium lining offering the best of heat retention and stretch. The high pile fabric traps air for snuggly warmth and insulation while the vertically aligned channel structure transports moisture away quickly – for a dry suit after your break in between sessions.

Eco_Stretch (black color way)

ION uses recycled nylon fabric for its exterior linings. The material is sourced from nylon waste, but the best thing is that its stretch properties are just as good as conventional linings.

Hot_Stuff 2.0

Hot_Stuff 2.0 comes with a plushier feel due to larger loops that trap more air for heat insulation. It is the stretchiest thermo lining in ION's entire range.

Silk_Stuff

Smooth inside lining for a comfortable feeling on bare skin. Despite its snuggly appearance it proves to be really hard core when it comes to the interior's superb flexible characteristics.

Maki_Tape 2.0

Highly elastic neoprene tape reinforces the seams on the lower body and commonly stressed cuff area from the inside

I_Foam

The I_Foam is an extreme lightweight and stretchy neoprene foam. Thanks to the new foamed structure with more air trapped inside and a lower density the I_foam also contributes to heat insulation and better flexibility.

Sweep_Cut

Seam-free shoulder design for increased paddle reach and shoulder rotation.

Seam_Reinforcement

All stress points are reinforced and secured by melco tape from the inside to ensure a longer lifespan of the seams.

Fused_Edges

Embossed sleeve and leg ends for a sleeker and more durable finish.

Water_Gate

Extra panel on the inside that seals off the back zipper and acts as a barrier preventing water from rushing into the wetsuit.

Seal_Tite

Again, this feature prevents water from rushing into the wetsuit by sealing off the cuffs and collar thanks to small rubber strips on the inside.

Drain_Holes

Quick water release when needed in order to combat water accumulation inside the wetsuit. The Drain_Holes are secured in place from the inside and won't expand.

Leg_Loop

Velcro patch to offer the option of attaching the Leg_loops. The loops can be wrapped tightly around the ankle to prevent water from rushing into the suit. To avoid losing the Leg_Loops when you're in the water, they feature a unique, extra-strong velcro construction.

Crash_Pads

The extra padding on the shins provides improved protection from impact.

CK_200111_ION_CapeTown_0552-min.jpg
CK_200115_ION_CapeTown_4267-min.jpg
CO2 Neutral

All ION wetsuits are manufactured climate neutral. This means we offset our CO2 emissions, caused by production and transport of our products, by supporting a hydropower carbon offset project in Kuruwita, SriLanka – supported by ClimatePartner.The entire process is transparent and traceable thanks to the ClimatePartner label and a certificate.

CHECK OUT OUR SUSTAINABILITY CONTRIBUTION
CLICK HERE